|
WMW-AFP 180 CNC FLOOR BORING MACHINE
NEW: 1992
CONTROL: HEIDENHAIN TNC 430 (8-AXIS CNC)
SPECIFICATIONS:
SPINDLE DIAMETER.................. 7"
SPINDLE TAPER..................... ISO 50
SPINDLE SPEEDS RANGES (2 STEPS)... 5 - 2500 RPM
MAIN MOTOR POWER.................. 80 HP
X-AXIS (COLUMN)................... 559"
Y-AXIS (HEADSTOCK)................ 177.16"
Z-AXIS (SPINDLE).................. 47.24"
W-AXIS (RAM)...................... 35.43"
NO. OF TOOL POSITIONS............. 60 ATC
FEED RATES (X,Y,W)................ 0.196 - 137.79 IPM
RAPIDS (X,Y, & W)................. 343 IPM & 472 IPM
Z-AXIS FEED RATES................. 236 IPM
CNC ROTARY TABLE:
MAX. LOAD CAPACITY................ 100 TON
TABLE SIZE........................ 137.79" X 137.79"
TABLE ROTATION SPEED.............. 1.0 REV/MIN
INDEXING POSITION, INCREMENTS..... 360,000 DEGREES
EQUIPPED WITH:
CNC ROTARY TABLE, 137" X 137" SIZE
HEIDENHAIN TNC 430 CNC (8-AXIS CAPABILITY)
HEIDENHAIN LINEAR SCALES ON X & Y AXES
HEIDENHAIN ROTARY ENCODERS ON B,W & Z AXES
INFINITELY VARIALE SIEMENS AC SERVO DRIVES (W,Y,Z,B,W)
BALL SCREWS ON ALL LINEAR AXES (Y,Z,W)
2-STEP SPINDLE DRIVE GEAR BOX (ZF, GERMAN MADE)
CNC CAPABILITIES:
-3D LINEAR INTERPOLATION (5-AXEX)
-2D CIRCULAR INTERPOLATION, 2 AXES OF 8 LINEAR ONES
-CAPABLE OF AUTOMATIC MODE, JOG (SET UP MODE), TEACH IN MODE
-CAPABLE OF MDA MODE (MANUAL DATA INPUT)
HELICAL INTERPOLATION (COMBINATION)
RIGID TAPPING
UNIVERSAL RS 232-C/V.24 AND RS 422/V.11 INTERFACE
** ADDITIONAL AND EXTENSIVE SPECIFICATIONS AND DESCRIPTIONS
AVAILABLE IN SEPERATE DOCUMENT UPON REQUEST.
** MACHINE IS AVAILABLE IMMEDIATELY AND MAY BE INSPECTED UNDER POWER.
RETURN
to our home page